Brand New High Output Stator + Magneto Flywheel Rotor + Flywheel Puller
- Direct replacement to your original unit
- Pick up pulsar coil included
- Connector included
- Opposite connector included
- Rubber grommet included
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- All products shipped are tested
High output stator generating 140W available for added accessories
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Specifications:
Specifications of Stator:
Dimensions:
Interior diameter: 30 mm
Exterior diameter: 84 mm
Thickness: 12 mm
Length of wires stator to grommet: 180 mm
Length of wires grommet to plug: 980 mm
Length of pickup coil's wire to grommet: 95 mm
Other specifications:
Number of wires: 4
Number of plugs: 2
Number of pins: 4
Wire to wire resistance:
Alternator: White to Yellow = 0.3ohms +/-20%
Pickup: White to Red = 264ohms =+/-20%
Specifications of Flywheel:
Dimensions:
Exterior Diameter: 100.4 mm
Interior Diameter: 86.5 mm
Interior Diameter Center Housing: 16 mm
Exterior Diameter Center Housing: 28 mm & 33 mm
Specifications of Puller:
Dimensions:
Length: 45.2 mm
Exterior Diameter: 30.17 mm
Interior Diameter: 23.14 mm
Exterior Diameter Center Housing: 15.19 mm
Warning:
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replace