{"product_id":"kit-stator-flywheel-gasket-suzuki-1","title":"KIT STATOR + FLYWHEEL + GASKET (SUZUKI)","description":"\u003ch3\u003eBrand New Kit Stator + Flywheel + Crankcase Cover Gasket \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement to your original unit\u003c\/li\u003e\n\u003cli\u003ePlug-and-play, direct fit, easy installation\u003c\/li\u003e\n\u003cli\u003eHighest grade of lamination materials\u003c\/li\u003e\n\u003cli\u003eHighest grade of copper winding, resistant to 200 degrees Celsius\u003c\/li\u003e\n\u003cli\u003eConnectors included\u003c\/li\u003e\n\u003cli\u003eRubber grommet included\u003c\/li\u003e\n\u003cli\u003eAll products shipped are tested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore installing your new stator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck the AC output of the stator\u003c\/li\u003e\n\u003cli\u003eReplace any burned or corroded connectors on stator and regulator rectifier\u003c\/li\u003e\n\u003cli\u003eCheck and repair any melted wiring\u003c\/li\u003e\n\u003cli\u003eUse hi-temp dielectric grease on all connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur stator may use a different wire color code than your original.\u003cbr\u003e All of the wires are installed in the correct order; please do not change any of the wiring configurations.\u003cbr\u003e This stator is designed as a direct plug-in replacement and should be used as such.\u003cbr\u003e When bolting stator in, always use locking compound.\u003cbr\u003e If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRisk of electric shock. Disconnect the battery before servicing.\u003cbr\u003e\nEnsure proper installation by a qualified technician to avoid malfunction.\u003c\/p\u003e\n\u003cp\u003eBefore attempting to start your Suzuki adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up\/pulser coil and adjust as close as possible but no less than 0.010\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRisk of electric shock. Disconnect the battery before servicing.\u003cbr\u003e\nEnsure proper installation by a qualified technician to avoid malfunction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStator :\u003cbr\u003e\nInterior diameter: 38 mm \u003cbr\u003e\nExterior diameter: 107 mm \u003cbr\u003e\nThickness: 12 mm\u003cbr\u003e\nLength of wires stator to grommet :  160 mm\u003cbr\u003e\nLength of wires grommet to plug :  330 mm\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003eOther specifications:\u003cbr\u003e\nNumber of wires: 3 \u003cbr\u003e\nNumber of plugs: 1\u003cbr\u003e\nNumber of pins: 3 \u003c\/p\u003e\n\u003cp\u003eWire to wire resistance:\u003cbr\u003e\nAlternator: Yellow to Yellow = 0.5 ohms +\/-20%\u003c\/p\u003e\n\n\u003cp\u003eFlywheel:\u003cbr\u003e\nExterior Diameter: 118 mm \u003cbr\u003e\nInterior Diameter: 108 mm\u003cbr\u003e\nInterior Diameter Center Housing: 25 mm\u003cbr\u003e\nExterior Diameter Center Housing: 33 mm\u003cbr\u003e\nThickness (exterior): 34 mm\u003cbr\u003e\nThickness (interior): 27 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBattery condition is extremely important. No stator can work correctly with a bad or weak battery. \u003cstrong\u003eAlways fully charge your battery before performing any charging system tests or replacing parts.\u003c\/strong\u003e If there is any doubt, have the battery load tested or replaced.\u003c\/p\u003e","brand":"rms","offers":[{"title":"Default Title","offer_id":48744638480628,"sku":null,"price":607.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/7155\/1732\/files\/351-900292.jpg?v=1781873907","url":"https:\/\/www.hvpowersports.com\/products\/kit-stator-flywheel-gasket-suzuki-1","provider":"HVPOWERSPORTS","version":"1.0","type":"link"}