{"product_id":"improved-stator-kokusan-flywheel-puller-upgrade-aprilia","title":"IMPROVED STATOR + KOKUSAN FLYWHEEL + PULLER UPGRADE (APRILIA)","description":"\u003ch2\u003e \u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eRecall-Type Stator + Kokusan Flywheel Rotor + Gasket + Puller For Aprilia 2009-2020 RSV4 \u0026amp; 2011-2020 Tuono V4 Repl.# 2D000049 897479\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIntroducing our newest heavy-duty recall-type charging system upgrade kit for Aprilia 2009-2020 RSV4 \u0026amp; 2011-2020 Tuono V4.\u003c\/p\u003e\n\n\u003cp\u003eAnyone who rides or repairs Aprilia's motorcycles is probably familiar with the stator, flywheel, and sometimes voltage regulator issues common to these models. Most of these bikes will have had at least one stator fail in its lifetime so far. The main problem was extremely strong magnets were used on the original flywheels, creating a very high power stator output, which generated excessive heat. This usually resulted in burned up, or shorted stator winding, and often in a failed voltage regulator.\u003c\/p\u003e\n\n\u003cp\u003eThe solution was a new flywheel from Kokusan with lower strength magnets, dropping the stator output and heat generation. This results in a charging system output perfectly matched for the bike's electronic needs, and long term reliability of the stator and voltage regulator.\u003c\/p\u003e\n\n\u003cp\u003eTo prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a complete reliable heavy-duty charging system replacement kit for your Aprilia. Upgrade today if you haven't already!\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded in this kit\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eHeavy-duty Kokusan brand recall-type OEM flywheel\u003c\/li\u003e\n\t\u003cli\u003eTriple-tested heavy-duty stator\u003c\/li\u003e\n\t\u003cli\u003eStator crankcase cover gasket\u003c\/li\u003e\n\t\u003cli\u003eFlywheel puller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eWith this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologies\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKokusan upgrade\/recall type flywheel\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLower-strength magnets for correct stator output, low heat generation, and long-term reliability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuilt to OEM size\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFits precisely in your ride: install it and forget it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImproved epoxy\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUses high temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHigh grade steel capping\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003ePrevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePrecise balancing\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEliminates crankshaft vibrations for longer engine longevity.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShop with confidence\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eAll products are tested.\u003c\/p\u003e\n\n\u003cp\u003eDon't waste time with temporary solutions, and start fixing your ride like a pro!\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStator Dimensions\u003c\/strong\u003e\u003cbr\u003e\nInterior diameter : 43 mm\u003cbr\u003e\nExterior diameter : 105 mm\u003cbr\u003e\nThickness : 13.8 mm\u003cbr\u003e\nLength of wires stator to grommet : 125 mm\u003cbr\u003e\nLength of wires grommet to plug : 320 mm\u003c\/p\u003e\n\n\u003cp\u003eOther specifications :\u003cbr\u003e\nNumber of wires : 3\u003cbr\u003e\nNumber of plugs : 1\u003cbr\u003e\nNumber of pins : 3\u003cbr\u003e\n\u003cbr\u003e\nWire to wire resistance :\u003cbr\u003e\nAlternator : Between each Yellow = 0.3 ohms +-20%\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFlywheel Dimensions\u003c\/strong\u003e\u003cbr\u003e\nExterior Diameter: 121 mm\u003cbr\u003e\nInterior Diameter: 107 mm\u003cbr\u003e\nInterior Diameter Center Housing: 19 mm\u003cbr\u003e\nExterior Diameter Center Housing: 34 mm\u003cbr\u003e\nThickness (exterior): 35.3 mm\u003cbr\u003e\nThickness (interior): 31.65 mm\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFlywheel Puller Specifications\u003c\/strong\u003e\u003cbr\u003e\n36 mm x 1.5 right hand male\u003cbr\u003e\nLength: 60 mm\u003cbr\u003e\nExterior Diameter: 48 mm\u003cbr\u003e\nInterior Diameter: 35 mm\u003cbr\u003e\nExterior Diameter Center Housing: 37 mm\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment notice:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: There are two possible kits for RSV4 engine. This kit ONLY fits RSV4 engine numbers HIGHER than 3413 with KOKUSAN flywheels. Please compare our flywheel to your original.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIf your RSV4 engine number is LOWER than 3413, your m\u003c\/strong\u003e\u003c\/p\u003e","brand":"rms","offers":[{"title":"Default Title","offer_id":48744535064820,"sku":null,"price":407.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/7155\/1732\/files\/351-900179.jpg?v=1781873635","url":"https:\/\/www.hvpowersports.com\/products\/improved-stator-kokusan-flywheel-puller-upgrade-aprilia","provider":"HVPOWERSPORTS","version":"1.0","type":"link"}