{"product_id":"50w-lighting-stator-for-gasgas-husqvarna-ktm","title":"50W LIGHTING STATOR FOR GASGAS, HUSQVARNA, KTM","description":"\u003ch3\u003eBrand new aftermarket lighting stator\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement to your original unit\u003c\/li\u003e\n\u003cli\u003ePlug-and-play, direct fit, easy installation\u003c\/li\u003e\n\u003cli\u003eHighest grade of lamination materials\u003c\/li\u003e\n\u003cli\u003eHighest grade of copper winding, resistant to 200 degrees Celsius\u003c\/li\u003e\n\u003cli\u003ePick up pulsar coil included\u003c\/li\u003e\n\u003cli\u003eConnectors included\u003c\/li\u003e\n\u003cli\u003eRubber grommet included\u003c\/li\u003e\n\u003cli\u003eAll products shipped are tested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe have even included the opposite connector (main harness side) as we know these are often melted \/ corroded \/ defective and a major cause of repetitive electrical issues.\u003c\/p\u003e\n\u003cp\u003eAll item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore installing your new lighting stator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck the AC output of the stator\u003c\/li\u003e\n\u003cli\u003eReplace any burned or corroded connectors on stator and regulator rectifier\u003c\/li\u003e\n\u003cli\u003eCheck and repair any melted wiring\u003c\/li\u003e\n\u003cli\u003eUse hi-temp dielectric grease on all connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur stator might have a different wire color code than your original part.\u003cbr\u003e\nAll the wires are installed in the correct order; please do not change any of the wiring configurations.\u003cbr\u003e\nThis stator is designed as a direct plug-in replacement and should be used as such.\u003cbr\u003e\nWhen bolting stator in, always use locking compound.\u003cbr\u003e\nIf our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010\"\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRisk of electric shock. Disconnect the battery before servicing.\u003cbr\u003e\nEnsure proper installation by a qualified technician to avoid malfunction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDimensions:\u003cbr\u003e\nInterior diameter: 28 mm \u003cbr\u003e\nExterior diameter: 59 mm \u003cbr\u003e\nThickness: 16 mm \u003cbr\u003e\nLength of wires stator to grommet: 100 mm \u003cbr\u003e\nLength of wires grommet to plug: 400 mm\u003cbr\u003e\nLength of pickup coil's wire to grommet: 60 mm\u003c\/p\u003e\n\u003cp\u003eOther specifications:\u003cbr\u003e\nNumber of wires: 4 \u003cbr\u003e\nNumber of plugs: 1 \u003cbr\u003e\nNumber of pins: 4 \u003cbr\u003e\nNumber of poles: 6 \u003cbr\u003e\nWire to wire resistance:\u003cbr\u003e\nPickup: Red to Green = 100 ohms +\/-20%\u003cbr\u003e\nSource: Black\/Red to Red\/White = 35 ohms +\/-20%\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBattery condition is extremely important. No stator can work correctly with a bad or weak battery. \u003cstrong\u003eAlways fully charge your battery before performing any charging system tests or replacing parts.\u003c\/strong\u003e If there is any doubt, have the battery load tested or replaced.\u003c\/p\u003e","brand":"rms","offers":[{"title":"Default Title","offer_id":48743830814964,"sku":null,"price":150.0,"currency_code":"CAD","in_stock":true}],"url":"https:\/\/www.hvpowersports.com\/products\/50w-lighting-stator-for-gasgas-husqvarna-ktm","provider":"HVPOWERSPORTS","version":"1.0","type":"link"}